|
| Products>>Global Navigation Satellite Systems>>GNSS OEM Boards>> |
| >>JNS100-GG OEM Board |
| |
 |
The JNS100-GG inherits all the features that made the JNS100 successful. With
an extended set of options it can cover a wider range of possible applications
with up to 128MB of onboard data storage, 4 times faster serial ports, a CAN
communication interface, IRIG-B timing interface, and the ability to perform as an
RTK base or rover. The second processor of the JNScore can be used by
customers for programming their own applications based on data and
measurements provided by the receiver.
|
| Specifications |
| |
Tracking Features |
| |
|
- 50 channel, all in view: L1 GPS/GLONASS and
WAAS/EGNOS
- Low signal tracking (down to 30 db*Hz)
- Fast acquisition and fast re-acquisition:
- Cold start <60 sec
- Warm start <10sec
- Reacquisition <1 sec and up to <0.01 sec
- Up to 30 g's of dynamic
- Almost unlimited altitude and velocity
(for authorized users)
- Advanced Multipath mitigation
- High accuracy velocity measurement
|
| |
Data Features |
| |
|
- Up to 100 Hz update rate for real time position and
raw data (code and carrier)
- 10 cm code phase and 0.1 mm carrier phase
precision
- RTCM SC104 version 2.3 input
- NMEA 0183 version 3.0 output
- Geoid and Magnetic Variation models
- RAIM
- Different DATUMs support
- CMR and CMR+ support
- RTK and DGPS
|
| |
Data Storage |
| |
|
- Up to 128MB of onboard non removable memory
for data storage
|
| |
Input/Output |
| |
|
- Two high speed (460.8 Kbps) standard
(6 to +6 voltage swing) RS232 serial ports
- 1 PPS output (TTL) synchronized to GPS, UTC, or
GLONASS
- Event marker input
- MinPad interface: Four external LED drivers,
ON/OFF control input
- External command input
- One serial timing output according to the IRIG200
95 standard in the B120 format
- CAN interface
|
| |
Electrical |
| |
|
- On board power supply accepts any unregulated
voltage between +6.5 to +40 volts
- On board backup battery saves data for about 10
years
- 1.1 Watt power consumption
- High shock and vibration resistance
|
| |
Environmental |
| |
|
- Operating Temperature -30ˇăC to +85ˇăC
- Storage Temperature -40ˇăC to +85ˇăC
|
| |
Physical |
| |
|
- Dimensions 88 x 57 x 15 mm
- Weight 55 g
- Connectors 30 pin for digital, MMCX for antenna
|
| |
RF Connector |
| |
|
- J100 is GPS/GLONASS antenna input connector,
MMCX. The central pin of this connector is power supply
for LNA, 5 VDC with sourced current up to 0.1A.
|
|
|
| |
| PRODUCT BRIEFS |
| Specification Datasheet |
|
| Manuals |
|
| Software |
|
|
|
| COMPANY INFORMATION |
| Telphone |
+86-10-8857 0030 |
| Fax |
+86-10-8857 0162 |
| Mobile |
(0) 1390 136 5491 |
| E-Mail |
sales@vibtel.com |
|
|
