|
| Products>>Global Navigation Satellite Systems>>GNSS Receivers>> |
| >>GNSS Receivers FlexPak |
| |
 |
NovAtel’s FlexPak now supports the new OEMV series of GNSS engines in a compact rugged enclosure for rapid integration. Users can choose price/performance requirements from among the FlexPak-V2, the FlexPak-V1, the FlexPak-V1G or the FlexPak-SuperStar II.
FlexPak-V2: gives access to GPS L2C and GLONASS L1/L2 signals
NovAtel’s FlexPak-V2 is capable of tracking the new L2C civilian signal. The L2C signal promises stronger signal tracking and better cross-correlation protection. The FlexPak-V2 also offers L1 and L2 GLONASS measurement data which can be used in combination with GPS data to provide more satellites for positioning in challenging environments. Full GPS+GLONASS position and real-time kinematic (RTK) capabilities are available now with AdVance RTK.
FlexPak-V1: powerful L1 receiver with VBS and CDGPS capability
NovAtel’s FlexPak-V1 provides the extra precision needed for L1 applications. It supports OmniSTAR VBS corrections (subscription required) and the Canadian Differential GPS service (no subscription required). NovAtel’s RT-20 model is available for L1 carrier-phase positioning up to 20 Hz.
FlexPak-V1G: L1 GPS plus GLONASS
NovAtel’s FlexPak-V1G receiver provides the benefits of L1-only GPS+GLONASS code or carrier-phase positioning. The addition of GLONASS satellites to the solution increases the availability of a position in obstructed sky conditions.
FlexPak-SSII: entry-level GPS receiver with carrier-phase positioning
NovAtel’s FlexPak-SSII receiver delivers the benefits of the SUPERSTAR II card, supporting GPS L1 code or carrier-phase positioning up to 5 Hz while maintaining centimeter-level accuracy.
Base Station or rover
All FlexPak models are capable of base station or rover operation. With two communication ports, one port to be dedicated to a radio and another to your host application. A base station model featuring RTCM SC-104 correction outputs is available. The USB cable and 12 VDC adaptor allow the FlexPak to be connected directly to your laptop for field operation. DB-9 serial port cables are also included.
|
- Features
- Meter to centimeter-level accuracy in the same enclosure
- Auxiliary strobe signals, including a configurable PPS output for time synchronization and event inputs
- Shock and dust resistant; waterproof to IPX7
- Rugged Deutsch connectors
- Active antenna support
- Benefits
- Select the performance you need for your system without cabling changes
- Ideal for low-payload UAV and robotics applications
- All features of the OEMV-1 and OEMV-2 family, including dual-constellation support with common, field-upgradeable software for all OEMV family receivers
|
FlexPak-V1 |
| |
|
Weight |
307 g |
| |
|
Power Consumption |
1.4 W typical GPS |
| |
|
Number of Channels |
14 L1 GPS
2 SBAS
1 L-band |
| |
|
Communication Ports |
1 port capable of RS-232 (921,000 bps) or USB 1.1
1 port capable of RS-422 (230,400 bps) or USB 1.1 |
| |
|
Real Time Performance (RMS)1 |
Single Point L1
SBAS
CDGPS
OmniSTAR VBS
DGPS
RT-202 |
1.8m
0.6m
0.6m
0.7m
0.45m
0.2m |
|
| |
|
Vibration3 |
4 g |
| |
|
Altitude3 |
18,288 m |
| |
|
Operating Temperature |
-40°C to +85°C |
| |
|
Humidity |
95% non-condensing |
| |
|
Immersion |
To IEC65029 IPX7 |
| |
Notes |
| |
|
| 1. |
Typical values. Performance specifications subject to GPS system characteristics, US DOD operational degradation, ionospheric and tropospheric conditions, satellite geometry, baseline length, multipath effects and the presence of intentional or unintentional interference sources. |
| 2. |
Expected accuracy after static convergence. |
| 3. |
Export licensing restricts operation to a maximum of 18,288 m and 514 m/s. |
|
|
FlexPak-V1 Model List |
| Single-Frequency |
| |
FLEXPAK-V1-RT20-F |
GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS,
OmniSTAR VBS, CDGPS, SBAS, 50 Hz |
| |
FLEXPAK-V1-RT20 |
GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS,
OmniSTAR VBS, CDGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1-L1-VBS |
GPS RT-20 corrections and raw data, code positions and DGPS, OmniSTAR VBS, CDGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1-VBS |
GPS code positions and DGPS, OmniSTAR VBS, CDGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1-L1-F |
GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 50 Hz |
| |
FLEXPAK-V1-L1 |
GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1-PVT |
GPS code positions, SBAS, 20 Hz |
| |
FLEXPAK-V1-1HZ |
GPS code positions and raw data, SBAS, 1Hz |
| |
FLEXPAK-V1-RTCM |
RTCM type 1 and 9 corrections generated from GPS*C/CDGPS correction stream, 1 Hz, no position or raw
data output |
|
FlexPak-V1G |
| |
|
Weight |
307 g |
| |
|
Power Consumption |
1.4 W typical GPS |
| |
|
Number of Channels |
14 L1 GPS
12 L1 GLONASS
2 SBAS |
| |
|
Communication Ports |
1 port capable of RS-232 (921,000 bps) or USB 1.1
1 port capable of RS-422 (230,400 bps) or USB 1.1 |
| |
|
Real Time Performance (RMS)1 |
Single Point L1
SBAS
DGPS
RT-202 |
1.8m
0.6m
0.45m
0.2m |
|
| |
|
Vibration3 |
4 g |
| |
|
Altitude3 |
18,288 m |
| |
|
Operating Temperature |
-40°C to +85°C |
| |
|
Humidity |
95% non-condensing |
| |
|
Immersion |
To IEC65029 IPX7 |
| |
Notes |
| |
|
| 1. |
Typical values. Performance specifications subject to GPS system characteristics, US DOD operational degradation, ionospheric and tropospheric conditions, satellite geometry, baseline length, multipath effects and the presence of intentional or unintentional interference sources. |
| 2. |
Expected accuracy after static convergence. |
| 3. |
Export licensing restricts operation to a maximum of 18,288 m and 514 m/s. |
| 4. |
GPS-only. |
|
|
FlexPak-V1G Model List |
| Single-Frequency |
| |
FLEXPAK-V1G-RT2L1-G |
GPS plus GLONASS 2 cm real-time kinematic positions, RTK corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1G-RT20-G |
GPS plus GLONASS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions
and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1G-RT20-F |
GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS,
SBAS, 50 Hz |
| |
FLEXPAK-V1G-RT20 |
GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS,
SBAS, 20 Hz |
| |
FLEXPAK-V1G-L1-G |
GPS plus GLONASS RT-20 corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1G-L1-F |
GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 50 Hz |
| |
FLEXPAK-V1G-L1 |
GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V1G-PVT-G |
GPS plus GLONASS code positions, SBAS, 20 Hz |
| |
FLEXPAK-V1G-PVT |
GPS code positions, SBAS, 20 Hz |
| |
FLEXPAK-V1G-1HZ-G |
GPS plus GLONASS code positions and raw data, SBAS, 1Hz |
| |
FLEXPAK-V1G-1HZ |
GPS code positions and raw data, SBAS, 1Hz |
| |
FLEXPAK-V1G-HDG |
GPS plus GLONASS range and heading/bearing, code positions and DGPS, SBAS, 10 Hz; must be paired
with another receiver |
|
FlexPak-V2 |
| |
|
Weight |
350 g |
| |
|
Power Consumption |
1.9 W typical GPS |
| |
|
Number of Channels |
14 L1, 14 L2 GPS
12 L1, 12 L2 GLONASS
2 SBAS |
| |
|
Communication Ports |
1 port capable of RS-232 (921,000 bps) or USB 1.1
1 port capable of RS-232, RS-422 (230,400 bps) or USB 1.1 |
| |
|
Real Time Performance (RMS)1 |
Single Point L1
Single Point LS/L2
SBAS4
DGPS
RT-202
RT-2 |
1.8m
1.5m
0.6m
0.45m
0.2m
1cm+1ppm |
|
| |
|
Vibration3 |
4 g |
| |
|
Altitude3 |
18,288 m |
| |
|
Operating Temperature |
-40°C to +85°C |
| |
|
Humidity |
95% non-condensing |
| |
|
Immersion |
To IEC65029 IPX7 |
| |
Notes |
| |
|
| 1. |
Typical values. Performance specifications subject to GPS system characteristics, US DOD operational degradation, ionospheric and tropospheric conditions, satellite geometry, baseline length, multipath effects and the presence of intentional or unintentional interference sources. |
| 2. |
Expected accuracy after static convergence. |
| 3. |
Export licensing restricts operation to a maximum of 18,288 m and 514 m/s. |
| 4. |
GPS-only. |
|
|
FlexPak-V2 Model List |
| Dual-Frequency |
| |
FLEXPAK-V2-RT2-G |
GPS plus GLONASS 1 cm real-time kinematic positions, RT-2 corrections and raw data, code positions and
DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V2-RT2-F |
GPS 1 cm real-time kinematic positions, RT-2 corrections and raw data, code positions and DGPS, SBAS,
50 Hz |
| |
FLEXPAK-V2-RT2 |
GPS 1 cm real-time kinematic positions, RT-2 corrections and raw data, code positions and DGPS, SBAS,
20 Hz |
| |
FLEXPAK-V2-L1L2-G |
GPS plus GLONASS RT-2 corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V2-L1L2-F |
GPS RT-2 corrections and raw data, code positions and DGPS, SBAS, 50 Hz |
| |
FLEXPAK-V2-L1L2 |
GPS RT-2 corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V2-SBAS |
L1L2 SBAS positions, 20 H |
| |
FLEXPAK-V2-HDG |
GPS plus GLONASS range and heading/bearing, code positions and DGPS, SBAS, 10 Hz; must be paired
with another receiver |
| Single-Frequency |
| |
FLEXPAK-V2-RT20-G |
GPS plus GLONASS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions
and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V2-RT20-F |
GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS,
SBAS, 50 Hz |
| |
FLEXPAK-V2-RT20 |
GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS,
SBAS, 20 Hz |
| |
FLEXPAK-V2-L1-G |
GPS plus GLONASS RT-20 corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
| |
FLEXPAK-V2-L1-F |
GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 50 Hz |
| |
FLEXPAK-V2-L1 |
GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 20 Hz |
|
Optional Accessories |
- GPS-700 series antennas
- ANT-500 series antennas
|
Additional Features |
- Common, field-upgradeable software for all OEMV family receivers with OEM4 compatible commands and logs
- Auxiliary strobe signals, including a configurable PPS output for time synchronization and event inputs
|
|
|
PRODUCT BRIEFS |
| Specification Datasheet |
|
| Quick Start Guides |
|
| Manuals |
|
| Software |
|
|
|
COMPANY INFORMATION |
| Telphone |
+86-10-8857 0030 |
| Fax |
+86-10-8857 0162 |
| E-Mail |
sales@vibtel.com |
|
|