Products>>Global Navigation Satellite Systems>>GNSS Receivers>>
>>GNSS Receivers DL-V3

    NovAtel’s DL-V3 is a general purpose high-performance receiver designed for base station and rover applications. The DL-V3 incorporates NovAtel’s OEMV-3 card housed in a rugged aluminum enclosure. The DL-V3 provides flexible connectivity through serial, USB, Ethernet and Bluetooth interfaces.
    Connectivity
    The DL-V3 provides several interfaces to suit your needs. Bluetooth is available for close-in wireless connectivity, whereas Ethernet is available for remote network-based access to your receiver. Additionally, the DL-V3 features highly visible, colored LEDs which indicate receiver status at-a-glance.
     GNSS Compatibility
     The DL-V3 is capable of using the positioning signals from both the GPS and GLONASS constellations for maximum flexibility and enhanced positioning in challenging environments. The DL-V3 supports GPS L2C and will be capable of tracking the L5 GPS signal as soon as it becomes available, so your investment is well protected.
     Performance
    The DL-V3 can provide sub-meter position solutions using L-Band correction services such as OmniSTAR or CDGPS. For higher accuracy applications, RT-20 and RT-2 solutions can provide real-time centimeter-level positions at a rate of up to 20 Hz, using NovAtel’s new AdVance RTK technology.
    Data Storage
    The DL-V3 comes with a removable Compact Flash card which provides combined storage for up to 2GB of logged data and the added convenience of data portability.
  • Features
    • Serial, Ethernet, USB and Bluetooth communications capability
    • GPS and GLONASS signals
    • Integrated OmniSTAR and CDGPS
    • Removable Compact Flash
    • AdVance RTK
  • Benefits
    • A wide variety of connectivity options for maximum flexibility
    • Capability to use all GNSS signals for optimal positioning
    • Sub-meter accuracy without the need for extra hardware
    • Removable memory provides data security and portability
    • Robust and reliable RTK performance

Performance1
  Horizontal Position Accuracy (RMS)
    Single Point L1
Single Point L1/L2
SBAS2
CDGPS2
DGPS
OmniSTAR2
    VBS
    XP
    HP
RT-203
RT-2		 1.8 m
1.5 m
0.6 m
0.6 m
0.45 m

0.7 m
0.15 m
0.1 m
0.2 m
1 cm+1ppm
  Measurement Precision
    L1 C/A Code
L1 Carrier Phase
L2 P(Y) Code
L2 Carrier Phase		 6 cm RMS
0.75 mm RMS (differential channel)
25 cm RMS
2 mm RMS (differential channel)
  Data Rate
    Measurements
Position
OmniSTAR HP/XP		 20 Hz
20 Hz
20 Hz
  Time to First Fix (L1, L2)
    Cold Start4
Hot Start5		 60 s
35 s
  Signal Reacquisition
    L1
L2		 0.5 s (typical)
1.0 s (typical)
  Time Accuracy6 20 ns RMS
  Velocity Accuracy 0.03 m/s RMS
  Dynamics
    Velocity7
Altitude7		 515 m/s
18,288 m

Physical & Electrical
  Size 185 x 162 x 76 mm
  Weight 1.3 kg
  Power
    Input Voltage
Power Consumption		 +9 to +28 VDC
3.5 W (typical)
  Antenna LNA Power Output
    Output Voltage
Maximum Current		 +5 VDC
100 mA
  Communication Ports
   
  • 3 RS-232 serial ports or 2 RS-422 plus 1 RS-232 serial ports
  • 1 Bluetooth module
  • 1 Ethernet capable port8
  • 1 USB 1.1 port
  Input/Output Connectors
    Power
Antenna Input
External Oscillator
COM1
COM2
AUX
I/O
Ethernet
USB		 4-pin LEMO
TNC female
BNC female
DB-9 male
DB-9 male
DB-9 male
DB-9 female
RJ-45
Type B
  Environmental
    Operating Temperature
Storage Temperature
Humidity
Waterproof
Vibration (operating)
     Random
     Sinusoidal
Shock		 -40°C to +75°C
-50°C to +95°C
95% non-condensing
IEC 60529 IPX7

MIL-STD-810F
IEC 68-2-6
IEC 68-2-27
  Regulatory
    Emissions


Immunity
Safety
Dust
FCC Part 15
EN 61000-6-3
EN 61000-6-2
EN60950
IEC 60529 IP6X

Included Accessories
  • Automotive 12 VDC power cable
  • Mounting bracket
  • Serial cable
  • Null-modem cable
  • I/O interface cable
  • Compact Flash

Optional Accessories
  • GPS-700 series antennas
  • ANT-500 series antennas
  • RF Cables - 5, 10 and 30 m lengths
  • AC adapters - International and North American

Additional Features
  • Multiple software models, including L1 and L1/L2 GPS or GPS plus GLONASS and carrier phase positioning with RT-20 or RT-2 options
  • Auxiliary strobe signals including a configurable PPS output and two mark inputs
  • Supports RTCM SC-104 version 3.0, CMR version 3.0, CMR+, NMEA 0183 version 3.01, and RTCA DO-217 message types
  • Field-upgradeable firmware

Model List

Dual-Frequency
  DL-V3-RT2-G GPS plus GLONASS 1 cm real-time kinematic positions, RT-2 corrections and raw data, code positions and DGPS, OmniSTAR HP/XP/VBS, CDGPS, SBAS, 20 Hz
  DL-V3-RT2-F GPS 1 cm real-time kinematic positions, RT-2 corrections and raw data, code positions and DGPS, SBAS, 50 Hz
  DL-V3-RT2 GPS 1 cm real-time kinematic positions, RT-2 corrections and raw data, code positions and DGPS, OmniSTAR HP/XP/VBS, CDGPS, SBAS, 20 Hz
  DL-V3-L1L2-G GPS plus GLONASS RT-2 corrections and raw data, code positions and DGPS, OmniSTAR HP/XP/VBS, CDGPS, SBAS, 20 Hz
  DL-V3-L1L2-F GPS RT-2 corrections and raw data, code positions and DGPS, SBAS, 50 Hz
  DL-V3-L1L2 GPS RT-2 corrections and raw data, code positions and DGPS, OmniSTAR HP/XP/VBS, CDGPS, SBAS, 20 Hz
  DL-V3-HP GPS code positions and DGPS, OmniSTAR HP/XP/VBS, CDGPS, SBAS, 20 Hz
  DL-V3-SBAS L1L2 SBAS positions, 20 Hz
  DL-V3-HDG GPS plus GLONASS range and heading/bearing, code positions and DGPS, SBAS, 10 Hz; must be paired with another receiver
Single-Frequency
  DL-V3-RT20-G GPS plus GLONASS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS, OmniSTAR VBS, CDGPS, SBAS, 20 Hz
  DL-V3-RT20-F GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS, OmniSTAR VBS, CDGPS, SBAS, 50 Hz
  DL-V3-RT20 GPS 20 cm real-time kinematic positions, RT-20 corrections and raw data, code positions and DGPS, OmniSTAR VBS, CDGPS, SBAS, 20 Hz, API support
  DL-V3-L1-G GPS plus GLONASS RT-20 corrections and raw data, code positions and DGPS, SBAS, 20 Hz
  DL-V3-L1-F GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 50 Hz
  DL-V3-L1 GPS RT-20 corrections and raw data, code positions and DGPS, SBAS, 20 Hz
  DL-V3-VBS GPS code positions, and DGPS, OmniSTAR VBS, CDGPS, and SBAS positions, 20 Hz
Notes
  1.
Typical values. Performance specifications subject to GPS system characteristics, US DOD operational degradation, ionospheric and tropospheric conditions, satellite geometry, baseline length, multipath effects and the presence of intentional or unintentional interference sources.
  2. GPS-only.
  3. Expected accuracy after static convergence.
  4.
Typical value. No almanac or ephemerides and no approximate position or time.
  5. Typical value. Almanac and recent ephemerides saved and approximate position and time entered.
  6. Time accuracy does not include biases due to RF or antenna delay.
  7. Export licensing restricts operation to a maximum of 18,288 meters and 514 meters per second.
  8. The DL-V3 is user-configured for either Ethernet or Bluetooth, but not both simultaneously.

PRODUCT BRIEFS
Specification Datasheet
Quick Start Guides
Manuals
Software
Get Acrobat Reader

COMPANY INFORMATION
Telphone +86-10-8857 0030
Fax +86-10-8857 0162
E-Mail sales@vibtel.com
UP HOME
VIBTEL INDUSTRIAL COMPANY INC. 1997 - 2010
Web Browser: Internet Explorer FireFox Opera Safari Google Chrome